Mirror the characteristics of the silver ink and printing requirements

 Do all know that an ink called silver mirror glass processing, printed on ordinary glass can achieve the effect of the mirror, mirror silver ink relative to other ink
Is a kind of special ink, it's expensive, it is able to reverse printing on the glass from the front can be a very good mirror effect, in order to obtain the best results, then have to pay attention to a few in the silk screen when it is characterized.

1, mirror silver ink dilute water. Because of this feature, the technical requirements of the screen printing is relatively high, the speed of the print speed had to control, when the printing speed is slow, dilute water mirror ink will leak shed screen, mirror ink down the network board must be continuous fast printing , avoid network board slagging group.

2, mirror silver ink for screen printing loop mirror requirements is very important, choose air dry environment. Avoid air flow, so as to achieve the best results

3, high mesh stencil screen printing

4、 mirror silver ink in the container Stir well to make it fully mixed.

5、Slightly lower, the tension of the screen, network distance adjusted any closer, and appropriate to reduce scraper scraping pressure, otherwise it will destroy the formation of the generation of the mirror effect.

6, mechanical printing, the back blade can not use hard aluminum or stainless steel, and should be used to the glial back blade, mirror screen printing ink coating uniformity, so that the mirror effect.

7, the mirror effect of the mirror ink and dried by the relevant terms of the mirror effect, natural drying is less than heated drying, and note that, the temperature of the heating and drying time should be consistent, otherwise specular performance and color saturation is also differ.